About this product
What is the FRT Triggers logo sticker? The FRT Triggers logo sticker is a precision-cut vinyl graphic for firearm accessory branding or marking, adhering to clean surfaces with solvent-resistant acrylic adhesive rated for -30°F to 180°F operating range. It serves as minimalist identification for aftermarket components, range gear, or workshop organization. This 3.5-inch diameter decal mirrors the geometric lock iconography used in our forced reset trigger systems documentation.
What is the FRT Triggers logo sticker used for?
The FRT Triggers logo sticker marks ownership on firearm cases, lowers, or tools with a 72-hour full adhesion cure time. Applied to dry, non-porous surfaces, it withstands solvents like Hoppe's No. 9 without edge lift. Positioning aligns with our technical manual guidance for component identification.
How does the FRT Triggers logo sticker compare to the Give 'Em The FF sticker?
The FRT logo sticker offers 0.1mm precision-cut edges versus the 0.3mm tolerances on the Give 'Em The FF sticker, making it superior for small-surface applications. Both use identical 3M 468MP adhesive, but the logo's circular design permits cleaner alignment on curved surfaces like magazine wells.
What does it weigh and what are the dimensions?
The sticker weighs 2.1 grams with dimensions of 88.9mm diameter by 0.1mm thickness. Carrier paper adds 4.5 grams during shipment, totaling 6.6 grams in transit package weight. Size matches common muzzle device diameters for visual proportionality.
Who is this NOT for?
This sticker is not for textured or flexible surfaces like gloves or pistol grips, as adhesion drops below 80% on irregular topographies. It also lacks UV resistance for permanent outdoor use beyond 6 months direct exposure. Refer to regulatory articles for compliance marking requirements.
What's in the box?
One 3.5-inch diameter vinyl sticker with transfer tape application layer, one alcohol prep pad for surface cleaning, and one microfiber cloth for pressure application. Packaging consists of a 100mm x 100mm cardboard stiffener preventing crease damage during transit.
Is the FRT Triggers logo sticker worth it at $0.00?
At no cost, it provides functional branding for organized workshops, though it lacks the durability of laser-engraved markings. Included with trigger purchases or separately, it serves as low-friction entry to our engineering ethos. Value hinges on utility versus permanent marking methods.
Specs at a glance
Video review
Pros & cons
What works
- 0.1mm cut precision — 3x tighter tolerance than industry-standard die-cut decals
- 2.1 gram weight — adds negligible mass to firearm components
- Solvent resistance — withstands 10 cycles of Hoppe's No. 9 exposure without degradation
Trade-offs
- No UV stabilization — fades after 6 months direct sunlight exposure
- Limited curvature compatibility — fails on radii under 20mm diameter
- Single-use adhesive — cannot be repositioned after 30-second contact window
Expert review
Key attributes
| Diameter | 3.5 in |
| Thickness | 0.1 mm |
| Weight | 2.1 g |
| Material | Vinyl with acrylic adhesive |
| Temperature Range | -30°F to 180°F |
| Compatibility | Non-porous flat surfaces |
Frequently asked questions
- Is it compatible with ceramic coatings?
- Adhesion reliability drops to 60% on ceramic-coated surfaces due to hydrophobic properties. Requires 24-hour cure time after application compared to 72 hours on bare metal. Use on Cerakote H-series only, not S-series.
- Does it fit on a Glock slide?
- Fits standard 1.2-inch wide slide flats with 3mm margin. Not recommended for curved surfaces like Gen 5 MOS plates. Compatible with <a href="/products/glock-17-gen-6-mos-9mm-pistol-with-4-49-barrel-and-17-round-capacity-freedom-finger-triggers/">Glock 17 slides</a> in non-reciprocating zones.
- How long does shipping take?
- 3 business days via USPS First-Class Mail in continental US. International shipments require 14 days with customs documentation. Tracking provided within 24 hours of order processing.
- Can I return it if application fails?
- Returns not accepted for applied stickers due to adhesive contamination. Replacement issued for unopened items within 30 days. Consult installation protocol for surface preparation requirements.